Door Pro:  CNC Edition
Software combining the features of Door Pro Std., Panel Optimization, and direct CNC Support!

Table of Contents

A Complete Software Solution
 Total Price:  $6,950
for
The Cabinet Door Manufacturer

with a user-defined post processor!

 
The CNC Operation, as processed by Door Pro

When Door Pro produces a cutlist, the panels are simultaneously sent to the Panel Optimizer which produces the G-Code Code behind the scenes to operate your CNC router.  The Cuts that are made automatically, depending upon your setup, are as follows:

  Straight Dado cuts of any width and depth
  Drilling patterns where the holes are of the diameter of the tool being used, and the depth is variable
  Circular plowing cuts, which are essentially holes larger than the bit's diameter
  Arcs defined by two end points and an arc height
  Up to two passes per part cut-out, where a thin skin may be left to maintain vacuum hold.
  Option to leave cut-out tabs at the corners of parts for single or double pass cut-outs. 
  Supports variable speed spindles and tool changers.
  Supports clockwise and counter-clockwise part cut-outs.
  Supports MDF doors machined with multiple tools.
  Ramping move or straight move as the method of entry when cutting dados or cutting out parts.
  Allows the Post Processor to be user-defined, making the g-code output compatible with the majority of CNC routers.

In addition,
  All cuts, arcs, and drilled holes may be referenced from any corner of each part, or from the center of a given part.
  Dados, drilled holes, and arcs may be cut at any angle
  Each cut and drilled hole may be defined as inches, feet, yards, millimeters, centimeters, decimeters, or meters, independently from other cuts and drilled holes.
  Each router tool (bit) may be defined in inches, feet, yards, millimeters, centimeters, decimeters, or meters, independently from other defined tools (bits).
  Door Pro CNC  software supports routers equipped with a tool changer.  (We may need to add some code, for no additional charge, for your particular router.  Check first before purchasing!)
  If you do not have a tool changer, Door Pro CNC allows all dado cuts and drilled holes, regardless of diameter, width of cut, or depth of cut, to be made from the same bit!   This feature can save an immediate $12,000 to $15,000 by eliminating the need for a tool changer!
  Process whole sheets of optimized parts or a single part chosen from a single door.
  Each cutting or drilling operation must be defined per door style.  Defining the operations once for a given door style, for example, will be defined for all doors of that style, regardless of width and height.
  When defining a door panel, the panel will be associated with a door style from your door library.

Plus...

All the features of Door Pro, the Standard Edition, providing data entry, invoicing, and cutlists!

    A Simple Sample of g-code

The following code is a sample of a relatively basic set of commands produced by Door Pro.  This is the code of instructions that actually tells a CNC router what to do.  This code can be greatly modified by our internal user-defined post processor.  So if different commands are needed, or if commands need to be ordered in a different sequence than is shown below, this can be done very easily within Door Pro.  We will work with someone of your choosing, who is familiar with the g-code necessary to run your machine, and within a very short time will have your g-code output matching the specific requirements of your CNC router.  (Please note:  Before you purchase Door Pro CNC, make sure you have someone who knows what g-code commands are required by your specific machine, in order for that person to let us know how the g-code shown below should be modified.)

G90
G20
G53
G0Z0.5F400
G0F700
M5
T1
S15000
M3
G01F300
G0X61.625Y8.75F700
G1X61.625Y8Z-0.25F110
G1X61.625Y8.75F300
G1X61.625Y-0.25F300
G1Z-0.25F110
G1X61.46875Y-0.25F300
G1X61.46875Y8.75F300
G1Z-0.25F110
G1X61.3125Y8.75F300
G1X61.3125Y-0.25F300
G1Z-0.25F110
G1X61.15625Y-0.25F300
G1X61.15625Y8.75F300
G0Z0.5
G0X31.125Y-0.25F700
G1X31.125Y0.5Z-0.25F110
G1X31.125Y-0.25F300
G1X31.125Y8.75F300
G1Z-0.25F110
G1X30.96875Y8.75F300
G1X30.96875Y-0.25F300
G1Z-0.25F110
G1X30.8125Y-0.25F300
G1X30.8125Y8.75F300
G1Z-0.25F110
G1X30.65625Y8.75F300
G1X30.65625Y-0.25F300
G0Z0.5
G0X-0.125Y-0.125F700
G1X0.625Y-0.125Z-0.65625F110
G1X-0.125Y-0.125F300
G1X75.563Y-0.125F300
G0X75.563Y-0.125F700
G1X75.563Y8.625F300
G0X75.563Y8.625F700
G1X-0.125Y8.625F300
G0X-0.125Y8.625F700
G1X-0.125Y-0.125F300
G0Z0.5
G0X-0.125Y-0.125F700
G1Z-0.73875F110
G1X75.563Y-0.125F300
G0X75.563Y-0.125F700
G1X75.563Y8.625F300
G0X75.563Y8.625F700
G1X-0.125Y8.625F300
G0X-0.125Y8.625F700
G1X-0.125Y-0.125F300
G0Z0.5
G90
G53
S0
M5
G0X96Y48Z0.5
M30
 

If you arrived here via a link somewhere, you may not be able to see our entire site.  Click here to officially enter the website of Cabinet Pro and Door Pro