The most Affordable Prices of Software in its Class!

 

                  

Be sure to read the Frequently Asked Questions that are just below this Pricing Chart. 

Program

Description

Purchase Price (USD)
(Standard Plan)

Read about our Free Technical Support

Cabinet Pro Lite

Limited Design, Cutlists, and Material Reports
Entry Level Version. See the Comparison Chart to determine if this version is right for you.

$1,450

Cabinet Pro Standard
STD Option 0

Design Only
For those shops and dealers who design only.  This option provides 3D Design, dimensioned Shop Drawings, Sectioned Views, and Elevations.  Drawings may be sent to another computer using Cabinet Pro, Options 1-5 to generate cutlists, bids, and/or CNC code.

$950

Cabinet Pro Standard
STD Option 1

Design & Bidding Only
For those shops who may not need cutlists, and for dealers who design only and send their drawings to the manufacturing plant using Cabinet Pro, this option provides 3D Design and Pricing.

$1,950

Cabinet Pro Standard
STD Option 2

Design & Cutlists Only
For those shops who may not need pricing and bidding right away.  Provides 3D Design, Cut lists, Face Frame & Frameless.

$2,250

Cabinet Pro Standard
STD Option 3

Design, Cutlists, & Bidding
Provides 3D Design, Cut lists, Pricing & Bidding, Security System, Face Frame & Frameless.
$2,950

Cabinet Pro Standard
STD Option 4

Design, Cutlists, Optimization, & Bidding
This is the complete solution for those shops without a CNC router.  Includes STD Option 3 plus panel optimization.

$3,650
(most popular option)

Cabinet Pro Standard
STD Option 5

Design, Cutlists, Optimization, Premium Graphics, Bidding, & Door Pro Std.
For those cabinet manufacturers who make doors for other cabinet shops.  Includes STD Option 4 plus Door Pro Std. capabilities.

$4,450

Cabinet Pro Standard
STD Option
6

Design, Bidding, Cutlists, Optimization, Door Pro Std., plus the following Add-ons: Grain Matching, CSV Export/Import, Premium Graphics, Re-Facing Modules
(See the Program Add-On Features below for descriptions of these added modules.)

$6,750

Door Pro Standard

Order Entry, Bidding, and Cutlists
This software is for the door manufacturer that supplies cabinet doors to other cabinet shops.  Provides Order Entry, Pricing & Bidding, and Cut lists.

$3,250

For the CNC Options below, make sure you understand our Post Processor Policies
In most cases, 2 days of Training are REQUIRED for CNC Versions. (See the Program Add-On features below.)

Cabinet Pro Lite CNC
CNC Option 1

Limited Design, Cutlists, Optimization, & CNC Output
Entry Level Software.  Allows 3D Line Drawings, cut lists, optimization, and CNC output.  Click here for the differences between this Lite version and the CNC Versions shown in Options 2 - 5 below.  Does not include CNC Smart Rules. No other software needed to generate CNC Code!

$2,450

Cabinet Pro CNC
CNC Option 2

Cutlists, Optimization, & CNC Output
Provides  unlimited Cutlists, Face Frame & Frameless, Panel Optimization, CNC Smart Rules, & CNC output.  Add Design and Bidding later
.   No other software needed to generate CNC Code!

$3,950

Cabinet Pro CNC
CNC Option 3

Design, Cutlists, Optimization, & CNC Output
Includes CNC Option 2 plus 3D Design, Elevations, and Shop Drawings.  Converts 3D Design directly to CNC output with no need for additional CAD software.  Add Bidding later.   No other software needed to generate CNC Code!

$4,750

Cabinet Pro CNC
CNC Option 4

Design, Bidding, Cutlists, Optimization, & CNC Output
This is the All-In-One Solution that includes 3D Design, Elevations, Shop Drawings, cutlists, optimization, bidding, and CNC output. No other software needed to generate CNC Code!

$5,850
(most popular option)

Cabinet Pro CNC
CNC Option 5

Design, Bidding Cutlists, Optimization, Premium Graphics, & CNC Output + Door Pro CNC
Includes CNC Option 4 plus the Door Pro CNC and the MDF Door Add-ons.   No other software needed to generate CNC Code!

$7,450

Cabinet Pro CNC
CNC Option
6

Design, Bidding, Cutlists, Optimization, & CNC Output, Door Pro CNC, plus the following Add-ons: Grain Matching, CSV Export/Import, Premium Graphics, Re-Facing Modules
(See the Program Add-On Features below for descriptions of these added modules.)
No other software needed to generate CNC Code!

$9,950

Door Pro CNC

Order Entry, Bidding, Cutlists, Optimization, and CNC output
This software is for the door manufacturer that supplies cabinet doors to other cabinet shops.  Provides Order Entry, Pricing & Bidding,  Cut lists, Panel Optimization & CNC output for MDF doors.   No other software needed to generate CNC Code!

$4,950

 

Program Add-On Features if purchased separately from the options shown above.

Program

Description

Purchase Price (USD)

Grain Matching Module

This module allows users of Cabinet Pro Std. and Cabinet Pro CNC the ability to match the grain AND grain direction of doors and drawers on a given panel so that the doors and/or drawers are cut from the same area thus showing continuous grain.  The user may match doors separately from drawers, or match doors and drawers together. $750

CSV Export/Import Module

This module allows users of Cabinet Pro Std. and Cabinet Pro CNC the ability to export cutlist information as a CSV file (Excel) for machines such as RazorGage. Tiger Stop, Panel Saws, 3rd party optimizers, and other software programs.  Also allows remote Dealers to send Excel files that will be converted to jobs and immediately processed by  Cabinet Pro.  This module also supports the Omga machine, whose file format is not CSV, but specific for your particular Omga machine.. $1,500

Training

If you want to get up and running in a minimum amount of time, and quickly set up and learn how to use Cabinet Pro, then this option is highly recommended.  Click here for details.  This option is for 2 consecutive days of training.  (Recommended for Standard Versions)

$1,200 for 2 days
If you want to get up and running in a minimum amount of time, and quickly set up and learn how to use Cabinet Pro, then this option is highly recommended.  Click here for details.  This option is for 4 consecutive days of training.  (Recommended for CNC Versions) $2,400 for 4 days

Inventory Control and Accounting Link

Automatically subtracts panels, lumber, hardware, accessories, and edgebanding from inventory with Re-Order points per item producing several reports & notifications. Supports hardware sub-Assemblies, automatic hardware assignments, and automatic CNC machining for hardware.  Keeps track of what customers have paid and what they owe in their various jobs. (Requires 3 to 10 days of additional training). Links to accounting software via Excel CSV files.

$3,550

Premium Graphics

Some examples of the 3-D graphics used in the Standard versions of Cabinet Pro listed above  may be seen by clicking here.

$1,550
(Per Computer
*)

Re-facing Module

This module allows users of Cabinet Pro Std. and Cabinet Pro CNC the ability to reface existing cabinets, doors, and drawers.  As part of this module, the faceframe itself may be cut out from a single sheet of laminate or plywood. $850

Additional CNC Posts
(One CNC Post is included in the purchase of any CNC Edition)

One CNC Post is included in the purchase of any CNC Edition.  If you have two CNC routers, or a router and a panel saw, or later on require another post for the same router, then there is an additional charge for each CNC Post after the first one.  (See our Company Policies for more details and exceptions.)

$1,950
(Per Post, after the first one)

Omga and RazorGage
Post

Generates Rail & Stile location reports for either the Omga or RazorGage Face Frame machines.  Some customization may be necessary.  Any required customization is included at no additional charge.

$1,500

Additional Seats

Each purchase of Cabinet Pro or Door Pro allows installation on one computer*.  If you require additional installations on Single User computers, called seats, then we charge a nominal charge of 30% of the current price of whichever software you purchased if ordered within 6 months of your initial purchase. After 6 months, the charge increases to 60%. (Additional Seats are not authorized for Networks.)   Call (541) 664-2808 to purchase. 30% of the purchase price of the software being installed for each additional computer (see our standard policy on this topic)

Horizontal Boring

Because Horizontal Boring is not a common capability among many CNC routers, we do not charge for this feature in any of the purchasing options of Cabinet Pro CNC, Options 1 to 5.  If your router does support horizontal boring and you wish to include this feature within Cabinet Pro CNC, then there is an additional charge per machine being supported.

$2,650

Please note:  Upon purchase of any of our software, you may download the full program, along with all video tutorials immediately.

 

Frequently Asked Questions about Pricing

*Why is the Premium graphics charged per computer rather than a second seat for 30% like the rest of the software?
The Premium Graphics that Cabinet Pro uses does not belong to Cabinet Pro LLC.  It belongs to Lightworks Design out of Sheffield, England.  Cabinet Pro LLC pays a royalty fee per installation of this graphics, which is why Premium Graphics must be purchased per computer.  However, having Premium Graphics on one computer and Standard Graphics on the other is generally not a problem because the Standard Graphics version is 100% compatible with the Premium Graphics. So it is not usually necessary to have more than one installation that supports Premium Graphics, since one can transfer jobs from one computer to the other very easily.

Do I need both Cabinet Pro and Door Pro if I make my own doors in my cabinet shop?
Usually, the answer to this is no, you do not.  Cabinet Pro allows the user to make his/her own doors with full cut lists defining each part of all doors made. He may also obtain door reports that will allow him to order them from a door
company.  The only reason one should purchase both Cabinet Pro and Door Pro is if your company produces not only cabinets, but also cabinet doors for other cabinet shops.

If I purchase Cabinet Pro without Pricing now, how much would it cost to add pricing later on when I am ready for it?
To upgrade to any program is simply the difference in price between the Current Regular Prices of the two programs in question.  If you purchased Cabinet Pro without Pricing now, and decided to add pricing at a later date, the price would be $1,000 ($3,995 minus $2,995)

I currently do not have a CNC router, but I plan to purchase one in the future.  If I purchase Cabinet Pro Standard now, how much would it cost to add CNC capabilities later on?
To upgrade to any program is simply the difference in price between the Current Regular Prices of the two programs in question.  If you purchased Cabinet Pro Standard and decided to add CNC capabilities at a later date, the price would be $6,000 ($9,995 minus $3,995).

I currently do not have a CNC router, but I plan to purchase one in the future.  If I purchase Cabinet Pro Standard and the Panel Optimizer now, how much would it cost to add CNC capabilities later on?
To upgrade to any program is simply the difference in price between the Current Regular Prices of the two programs in question.  If you
purchased Cabinet Pro Standard, as well as the Panel Optimizer now, and decided to add CNC capabilities at a later date, the price would be $5,000 ($9,995 minus $3,995 is $6,000.  However, since the Panel Optimizer is included with the CNC version, and you had already purchased it as a separate module, we would subtract an additional $1,000, which is its current regular price)

Do I need to purchase Premium Graphics?
Most of our current customers are satisfied with the Standard OpenGL graphics that come with the Standard version of Cabinet Pro, since they only want to give their customers an idea of what their cabinets will look like.  However, if you require a more realistic-looking 3D Rendering of a kitchen, office, closet system, garage system, or whatever you will be designing, then you may want to purchase the Premium upgrade.  To see some examples of our Standard graphics, click here.  To see some examples of what our Premium graphics will eventually look like, click here to transfer to the Lightworks Design website.

Do you have any special pricing for Beta Testers?
We do not have the need for beta testers, since our software is already completed and does not require testing.

Do you have a Network Version of Cabinet Pro and Door Pro?
Network versions are available for both Cabinet Pro and Door Pro, and can support dumb terminals on a single server.  The cost for the Network Version is at least 4 times the cost of whichever program(s) you wish to purchase.

Do you offer financing?
Yes, we offer a number of financial options for you to obtain our software in order to fit your individual budget.  Please click here to view the various Financial Options we offer.

Your competitors do not advertise their prices.  Why do you advertise your prices on your Website?
Have you ever been in the market for a car only to visit a car dealership where the sticker prices are not on the cars?  This is done so that you have to talk to a salesperson who then not only lets you know what the price of a car is, but he also begins the process of selling you a car and making sure you don't leave his dealership for another. It is called sales manipulation.  At Cabinet Pro LLC, our philosophy is different.  We want you to look at our demo, study the features of our software, and know that our prices are reasonable so that you are not manipulated to call us, but rather you are motivated to call us because you are interested in what you have seen and read about Cabinet Pro or Door Pro.

 

 

 

 

 

Click here for a comparison study of Cabinet Pro